Caulks & Sealants

Application Guidelines

Application Temperature:

Above 40°F (4°C)

Service Temperature Range:

-25°F to 180°F (-31°C to 82°C)

Method of Application:

Cartridge/caulking gun

Working Time:

Approximately 15-20 minutes for a 1/4" bead

Application Directions:

1. Surfaces must be clean and free from any material that may prevent adequate adhesion. Properly designed joint not to exceed 1/2” in width. 2. Cut nozzle at 45° angle for a 1/8” to 1/2” bead and place in cartridge gun. 3. Make sure concrete is dried and cured. Force sealant into clean joint. If necessary, smooth bead immediately with a damp sponge. No tooling is required. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability.

Painting:

The sealant should be dry to the touch and ready to paint in 2-4 hours.

Cleanup:

Clean uncured material with water. After curing, excess sealant must be cut or scraped away.

Coverage:

Container	1/8” Bead	1/4" Bead	3/8" Bead	1/2" Bead
10.1 oz. Cartridge	123 ft.	31 ft.	14 ft.	8 ft.

Limitations:

Not designed for continuous submersion or use below the waterline. Air, sealant and surface temperature should be above 40°F and below 120°F. Do not apply if rain is expected within 12 hours. The sealant should be dry to the touch and ready to paint in 2-4 hours. Humid conditions may extend drying times. For best results, store in a dry location at or below 75°F.

50 Year Limited Warranty: If not satisfied with product performance when used as directed, return container and proof of purchase to Franklin International, Inc. for replacement of product. Liability is limited to product replacement only.